[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Running Triggered Spark Gap at lower voltage????



Original poster: "Mccauley, Daniel H by way of Terry Fritz <teslalist-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>

I don't have much experience with triggered spark gaps other than using them
as crowbar discharge devices at work.

But, I currently have a few 40kv-100kv triggered EG&G spark gaps.  Any
possibility these will work at least somewhat
properly at voltages of 30-35kV???  I know its under spec, but it may work.

Thanks

The Captain