Re: Help

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: ajones18-at-bellsouth-dot-net 

In <6.0.0.22.2.20031011143409.036de158-at-twfpowerelectronics-dot-com>, on
10/11/03
    at 02:34 PM, "Tesla list" <tesla-at-pupman-dot-com> said:

 >Original poster: "Emmett Secrest" <secrest2032-at-msn-dot-com>

snip

 >found out that wouldn't work.  I then cut the support in half along the
 >centerline of the holes thinking this would ease the problem and that
 >then  I could fasten the upper half back down to hold everything in
 >place. This  isn't working either since you cant keep the individual
 >turns in place  while you try and place the other turns.

 >Thanks,

 >Emmett Secrest

That's exactly the way I did my largest primary. But I fastened each upper
half back down after the tubing was in place on about three supports and
then continued on. No way I was gonna try doing the whole thing and hope
it would lay there.

Alan Jones - KI4ATV
http://personalpages.bellsouth-dot-net/a/j/ajones18/index.html
--