[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Source for Aluminum Spheres (up to 12" threaded)



Original poster: "RIAA/MPAA's Worst Nightmare" <mike.marcum-at-zoomtown-dot-com> 

Thanks for the link. 22" is a decent size for most TC's, but what if I
wanted to build a giant vdg? Any cheap source for 36"+? I read somewhere
someone tried to cut the ends off a big propane tank, weld them together,
and use that until he realized it was much too heavy (lol).

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, October 24, 2003 10:18 AM
Subject: Re: Source for Aluminum Spheres (up to 12" threaded)


 > Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>
 >
 > Hi,
 >
 > This place also sells stainless steel "mirror balls" for great prices too:
 >
 > http://www.waterscapesweb-dot-com/orbs.html
 >
 > They are very strong but pretty light:
 >
 > http://hot-streamer-dot-com/temp/Old2001Files/2001-04/Orb.jpg
 >
 > Cheers,
 >
 >          Terry
 >
 >
 > At 06:36 AM 10/24/2003, you wrote:
 >
 > >If anyone is looking for a good source of Aluminum Spheres for use as
 > >toploads or for strike balls, here is
 > >a source which is relatively inexpensive.
 > >
 > >http://www.americanflagstore-dot-com/hardware/goldball.htm
 > >
 > >I recently was working with Ross Engineering to get a quote on 3" and 4"
 > >diameter aluminum spheres, and they quoted
 > >the 3" sphere at $310.00 each (qty 10-50) and 4" spheres at $350.00 each
 > >(qty 10-50).  Thats absurd, especially
 > >considering the same company quotes 20" x 3" toroid i was interested in
 > >at $220.00 each.
 > >
 > >Dan
 >
 >