[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Instrumental TC tuning



Original poster: "Mudford, Chris" <chris.mudford-at-agresearch.co.nz> 

Hi Malcolm

The filter I am using is as per Greg Hunters page whereby I have a
safety gap to ground (RF ground) for each of the HV outputs with a 1000
pF 10 kV DC ceramic disk capacitor across each gap.  In each HV output
there is 1200 ohms of resisatnce at 50 W as ceramic wirewound resistors
(5 seriesed 240 ohm).  In retrospect I did not need to build to this
wattage for my 6/30 NST.

Thanks for the other info as to "instrumental tuning".

Cheers, Chris. (NZ)
==========================================================