[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Double Wound Secondary



Original poster: "June Heidlebaugh" <rheidlebaugh-at-desertgate-dot-com> 

Real bad idea. In the secondary the voltage is well beyond the insulation
strength if the wire and would burn through. The single turn (with no
spacing) is about all the voltage the wire can stand.        Robert   H
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, September 23, 2003 6:09 PM
Subject: Double Wound Secondary


 > Original poster: "WIZZARD ." <pbobyk-at-hotmail-dot-com>
 >
 > I am just completing a 10.25" by 45" ( winding length ) secondary with
 > number 20 wire. ( British and AWG confuses this Canadian )
 > I am wondering if double winding the secondary, one winding over another
is
 > a good idea.
 > Im sure someone has tried this.... any ideas?
 >
 > WIZZARD
 > Dwight, Ontario
 > Canada
 >
 > __
 >
 >