Re: square coil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net> 

The sharper 90 degree bends will weaken the insulation at the corners,  a
potential for falure.

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, April 02, 2004 4:29 AM
Subject: square coil


 > Original poster: "steve" <steve_vance-at-cablelynx-dot-com>
 >
 > Got a question for the list,
 > I'm looking for a new project to start. I am thinking about building a
 > small 2"orbit powered coil. My question is has anyone ever built a
 > Tesla coil with a square primary or secondary? Is there any reason that
 > this wouldn't work?
 >
 > Steve Vance
 > http://fire.prohosting-dot-com/~bonestc/index.htm
 >
 >