Re: Flyback Driver PCBs

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net> 

Thats what I said.  Steve got like 3" max from his flyback and it was under
oil with a toroid!

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, April 12, 2004 2:52 PM
Subject: Re: Flyback Driver PCBs


 > Original poster: Fucian-at-aol-dot-com
 >
 > In a message dated 4/12/2004 10:00:02 AM Eastern Standard Time,
 > tesla-at-pupman-dot-com writes:
 > two inches arc with halfbridge driver ? that's really not impresive. With
 > HVguys simple flyback driver I can get 3-4 inches -at- 25V and Steve Wards
half
 > bridge driver does easy 5 inches -at- 60V.
 > I suggest you work on your design a bit ;-)
 > regards - Vladan
 >
 > 5 inches from a flyback?No way...I dont know of any flyback capable of
 > that, Especially at 60volts!
 >
 > A flyback would arcover no doubt at 5inches....Do you have sme pictures to
 > show this?
 >
 > Matt
 >
 >