[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Where do I get a couple Caps



Original poster: Tom Wideman <twidem01-at-baker.edu> 

So is this the kind i want?

http://www.cornell-dubilier-dot-com/film/9422000.htm

(Part #:942C20S22K (3 one down))

Nano2e


---- Original message ----
 >Date: Thu, 22 Apr 2004 12:08:26 -0600
 >From: "Tesla list" <tesla-at-pupman-dot-com>
 >Subject: Re: Where do I get a couple Caps
 >To: tesla-at-pupman-dot-com
 >
 >Original poster: Terry Fritz
<teslalist-at-twfpowerelectronics-dot-com>
 >
 >Hi,
 >
 >Look here:
 >
 >http://www.thegeekgroup-dot-org/mmc/
 >
 >You could use six of the 0.15uF or four of the 0.10 uF.
 >
 >Cheers,
 >
 >         Terry
 >
 >
 >At 10:04 AM 4/22/2004, you wrote:
 >>Hey..I am looking for a total .024 uF in my MMC (did I say
 >>that right (NOOB!)) What should the rated voltage be if I
am
 >>using a 4000V 30mA NST? What kind should they be (I am
 >>looking at Metallized Polypropylene)? And where can I get
 >>just a few?
 >>
 >>Nano2e
 >
 >