[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Epoxy doesnt work.

To: tesla-at-pupman-dot-com
Subject: Re: Epoxy doesnt work.
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 27 Apr 2004 08:12:33 -0600
Resent-Date: Tue, 27 Apr 2004 08:17:09 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <7HIUXB.A.ZYD.ftmjAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Matthew Smith <matt-at-kbc-dot-net.au> 

Eric writes:

>I was trying to to epoxy the connections I made to my MOTs 0 volt side on 
>the HV. It doesnt seem to have worked. Even after 16 hours it is still 
>soft in some situations and gummy in the others. Any1 know what the problem is?

Matthew replies:

Possibilities include:
1) Incorrect amount of hardener
2) Hardener not mixed in properly
3) Old hardener
4) Contamination of resin/hardener/mixing vessel/surface

Cheers

M

-- 
Matthew Smith
Kadina Business Consultancy
South Australia
http://www.kbc-dot-net.au

Prev by Date: Re: Magnetic Polarity Re: Magnetic quenching.
Next by Date: Re: Homemade PCBs!
Prev by thread: Re: Epoxy doesnt work.
Next by thread: Re: Epoxy doesnt work.
Index(es):
- Date
- Thread