[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to make a "good" copper tubing clamp



Original poster: "S&JY" <youngsters-at-konnections-dot-net> 

Dan,

By now you have seen quite a variety of clamp ideas.  Here is yet one more.
Many of us one or more cartridge fuse clips on 1/4 inch primary windings
with good success.  I use 3 clips in parallel bolted to a piece of copper.

There are much larger round connection cartridge fuses available, and
therefore much larger fuse clips that might work well for you.

--Steve