[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Crazy Flyback!



Original poster: "Brian" <ka1bbg-at-webryders-dot-net> 

no computers then, but very accurate sensors and an analog controller
costing many bucks....cul brian f.


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, February 19, 2004 7:47 PM
Subject: Re: Crazy Flyback!


 > Original poster: "Crow Leader" <tesla-at-lists.symmetric-dot-net>
 >
 > Good point, but I doubt RCA used computerized winders back in the day.
Thin
 > wire is still evil stuff.
 >
 > KEN
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Thursday, February 19, 2004 1:20 PM
 > Subject: Re: Crazy Flyback!
 >
 >
 >  > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >  >
 >  >
 >  > Yes you could --- if you have a $20,000 computerized coil winder at
your
 >  > disposal.  Sec is  4,200 turns of #42 AWG and it's impossible to wind
it
 > by
 >  > hand or even with a lathe.  Requires an automated machine.
 >  >
 >  > Dr. Resonance
 >  >
 >  >
 >  >
 >  >  > For that kinda cash you could get a giant core from an induction
 >  >  > heater and wind your own monster flyback.
 >  >
 >  >
 >  >
 >
 >
 >