[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RSG motor candidate?



Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi Kevin,

1/900HP seems way too small.  I think people of used down to 1/20HP on 
small rotary gaps.  I have some motors probably like yours too.  I think 
they come out of tape drives.

Cheers,

         Terry

At 11:05 PM 1/2/2004, you wrote:
>Please forgive my lack of motor knowledge. Can this work as a RSG motor?
>Permanet Split Capacitor High Slip, Synchronous
>faceplate values:
>115 V AC
>60 HZ
>single phase
>11 Watts
>3600 RPM
>HP 1/900
>Torq. 0.3 in oz
>Capacitor 1.6 uF
>It has 3 leads and is a bit smaller than a fist.
>Thanks for any advice,
>Kevin Wilson