Re: Fwd: [jlnlabs] TESLA COIL REVISED6

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Bart Anderson <classi6-at-classictesla-dot-com> 

Hi Ed,

What's frequency of the driver with the primary wrapped around it?

Just curious since I'm building something similar,
Thanks,
Bart

>Hi Dr. R,
>
>Thanks.
>
>Actually the 1/2" copper tubing is the primary.
>
>The secondary or driver coil is AWG #10 TFFN stranded machine tool wire
>wound on a 32" diameter polyethylene form for a distance of 25" (142
>turns/1218 feet). You just can't see the secondary because it's covered
>with several layers of .100" thick polypropylene sheeting.
>
>Happy 2004 to all.
>
>Ed Wingate RATCB
>
>
>
>