RE: Aligning Phases using PFC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ian McLean" <ianmm-at-optusnet-dot-com.au> 

Hi all.

 >If I get a 3-phase 50A outlet, which for me is as simple as running a line
from
 > my distribution box to my workshop with an RCB breaker in the box and a
 > 3 phase (4 pin) outlet in my workshop, it would be a simple Wye connection
 > (3 actives (hots) and 1 common neutral).

A small correction on my previous post.  The outlet for a Wye 3-phase
connection would have to be 5-pin, yes ?  3 hots, 1 common neutral, and of
course, ground.  Forgot about ground.

Rgs
Ian