[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SSTC Board layouts?



Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

If you have eagle,  I'll send you the layout that I made when I had my
boards made.  It is double sided though,  I don't know if you can do that
easily with press and peel.

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, July 06, 2004 6:46 PM
Subject: SSTC Board layouts?


 > Original poster: Shad Henderson <sundog-at-timeship-dot-net>
 >
 > Hi All,
 >
 >    Some free time is showing it's head, and I'm interested in making a
 > small SSTC (FET based).
 >
 >    I'll be blunt.  I positively suck at laying out PC bards. Are there
 > any designs out there suitable for printing on a toner-transfer paper
 > (press-n-peel)?  There's a nice design on www.hvguy-dot-com, but I'm not
 > sure where all the connections are to be made?
 >
 >
 > Help?
 >
 >
 >
 >