[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: All who know VTTC stuff ;-).



Original poster: Kreso Bukvic <kreso.bukvic-at-kc.htnet.hr> 

I could send anything you need to your mail or i could put it on my site or
i could put in on the site of my company ( yes 1 Gig of free webspace).

This coil started to anoy me, it just aint working properly :-(.

Best Regards

Kreso Bukvic
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, July 16, 2004 3:58 PM
Subject: Re: All who know VTTC stuff ;-).


 > Original poster: Brett Miller <brmtesla2-at-yahoo-dot-com>
 >
 > Kreso,
 >
 > Hello.  I am tooling up for a 304tl based VTTC project
 > as well as a possible 833A coil.  I would love to see
 > any schematics, pictures, and any documention
 > whatsover on your VTTC project.  Keep up the good
 > work!
 >
 > -Brett
 > http://www.hot-streamer-dot-com/brett
 >
 >
 > --- Tesla list <tesla-at-pupman-dot-com> wrote:
 >  > Original poster: FutureT-at-aol-dot-com
 >  >
 >  > In a message dated 7/15/04 6:40:20 PM Eastern
 >  > Daylight Time,
 >  > tesla-at-pupman-dot-com writes:
 >  >
 >  > Kreso,
 >  >
 >  > I don't know how much power is going into your coil,
 >  > nor do
 >  > I know how it is designed and built.  If you have
 >  > access to
 >  > a wattmeter, this would be helpful for calculating
 >  > the potential
 >  > spark length.  Of course much depends on the quality
 >  > of
 >  > components, the design, the tube, etc.  If you have
 >  > no
 >  > wattmeter but have an ammeter that will at least
 >  > give you
 >  > a general idea of the input power if you guess at
 >  > the power
 >  > factor.  In any case it's hard for me to say whether
 >  > your coil
 >  > can do better given my limited knowledge of the
 >  > coil.  I also
 >  > don't know how long the sparks were originally.  I
 >  > get the
 >  > impression that your sparks are longer now after you
 >  > re-wound
 >  > the secondary, but I don't know how much longer.
 >  > You may
 >  > have given a website or info in the past, but I've
 >  > been busy
 >  > and often delayed in my website viewing.
 >  >
 >  > John
 >  >
 >  > >Original poster: Kreso Bukvic
 >  > <kreso.bukvic-at-kc.htnet.hr>
 >  > >
 >  > >Nope it does not produce swordish sparks! I
 >  > rewinded the secondary today. It
 >  > >makes now ~20 cm sparks.
 >  > >
 >  > >Is there a chance for more?
 >  > >
 >  > >Best Regards
 >  > >
 >  > >Kreso Bukvic
 >  >
 >  >
 >  >
 >  >
 >  >
 >
 >
 >
 >