[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Help needed with voltage divider

To: tesla-at-pupman-dot-com
Subject: RE: Help needed with voltage divider
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 28 Jul 2004 07:11:41 -0600
Resent-Date: Wed, 28 Jul 2004 08:26:36 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <znmXCC.A.eMH.Ze7BBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Denicolai, Marco" <Marco.Denicolai-at-tellabs-dot-com> 


 > Possible electrolysis (breakdown) of the water into hydrogen
 > and oxygen if the power level is high enough.  If the tube is
 > sealed the gases have no where to go.
 >
 > Dr. Resonance

The probe is intended for temporary AC measurements. There should be
minimal electrolysis with AC.

The mentioned air bubbles developed with the probe disconnected and
unused.

Best Regards

Prev by Date: Re: Dr R's 16KV 300ma transformer
Next by Date: RE: Help needed with voltage divider
Prev by thread: RE: Help needed with voltage divider
Next by thread: RE: Help needed with voltage divider
Index(es):
- Date
- Thread