[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cap-driven x-former?



Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

Hi,

I believe that capacitor is part of the Ferro-Resonant circuit commonly used
in iron cored transformers.  Google can tell you more then I can.

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, June 06, 2004 7:49 PM
Subject: Cap-driven x-former?


 > Original poster: FIFTYGUY-at-aol-dot-com
 >
 > Folks-
 >
 >      I bought a HV transformer many years ago (from Mouser, probably) that
has
 > a unique feature that I have never figured out.
 >      It's a 5KV, 300mA secondary, 110V primary. Single phase, no windings
 > connected to ground at all. From my recent TC research, I learned that
this
 > X-former also has magnetic shunts (which have since resisted all my
 > attempts to
 > remove them without destroying the unit). Makes a pretty impressive
Jacob's
 > Ladder
 > driver with the high, but self-limited current.
 >      What has puzzled me is why it has a third winding that requires the
use
 > of a cap to make the transformer run. The third winding is center tapped,
and
 > it's inside (wound closer to the core) of the secondary. The center tap is
not
 > used, but the seller's ad mentioned the cap requirement, and they included
a
 > cap and a connection drawing.
 >      With the cap, it's works great. Without, the HV leads barely put out
any
 > spark. How does this thing work, and can this "extra winding with cap"
 > principle be applied to other existing HV transformers as well?
 >      More specs: Seller advertised it as out of a copier power supply.
Inked
 > on the side of the unit is "General Electric part # 9T68Y5022G10". Made
for
 > Eastman Kodak (with an Eastman Kodak part #).
 >      Cap is a 10uF 1000VDC oil-filled type.
 >
 > -Phil LaBudde
 >
 >
 >
 >
 >