[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ISSTC questions



Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

The hardware store?

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, June 07, 2004 8:29 PM
Subject: Re: ISSTC questions


 > Original poster: Ed Phillips <evp-at-pacbell-dot-net>
 >
 > "Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
 >
 > The problem with that is,  you can melt the wires, and it leaves a
 > coating
 > of oxidization on the wires which won't attract solder.
 >
 > The best method is to fray the wires and dip them in pain remover gel,
 > that
 > will remove the enamel and leave bare metal.
 >
 > Regards - Jim Mitchell"
 >
 > Where do you get pain remover gel?  We could sure use it in our house.
 >
 > Ed
 >
 >