Re: bulk toroid order 24 x 12 x 6 inch size

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


Use a flatplate of 1/2 inch plywood, the two quartering section also out of
plywood, with the balance out of styrofoam and they are quite sturdy.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, June 09, 2004 7:40 AM
Subject: Re: bulk toroid order 24 x 12 x 6 inch size


 > Original poster: "James" <mustang3-at-cox-dot-net>
 >
 > Hi list, D.C.,
 >      I need a bigger toroid. I'd be interested in 36 X 12 X 12 or similar.
 > I'm gonna work one up with chicken wire and foam insulation. The problem
is,
 > the chicken wire toroids are not very sturdy.
 >
 > Later,
 >
 > James
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Tuesday, June 08, 2004 9:34 PM
 > Subject: bulk toroid order 24 x 12 x 6 inch size
 >
 >
 >  > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >  >
 >  >
 >  > Anyone else want to get in on the bulk toroid order?  Size is 24 x 12 x
6
 >  > inch.  Spun aluminum.
 >  >
 >  > Last call ---- I need to enter the quantity by noon tomorrow.  Price
with
 >  > shipping delivered anywhere is US is $306.50.  That's vs. $420 on a
single
 >  > order quantity.
 >  >
 >  > Dr. Resonance
 >  >
 >  > Resonance Research Corporation
 >  > E11870 Shadylane Rd.
 >  > Baraboo   WI   53913
 >  >
 >  >
 >  >
 >
 >
 >