Re: Rotary SG Safety

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com> 

Hi Arpit,

That's scary!  If you need rotor material, I could get you a chunk of ~3/8"
canvas grade phenolic.  Let me know offlist if you want some.

David E Weiss


 > Original poster: "Arpit Thomas" <arpit-at-inzo-dot-org>
 > enclosing the spinning disk with brick or concrete when its too expensive
 > to get a properly machined disk. FOr my RSG I'm going to make a laminate
of
 > 4 or 5  8 inch angle grinder disks and drill bolts through them. Ill then
 > attach it to a bench grinder, and surround it in bricks. This will have
the
 > added effect of making the whole operation quieter!