Re: Tungsten rod

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: robert heidlebaugh <rheidlebaugh-at-desertgate-dot-com> 

A dremmel cut off wheel workes well
    Robert   H
-- 


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Sun, 27 Jun 2004 07:25:59 -0600
 > To: tesla-at-pupman-dot-com
 > Subject: Tungsten rod
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Sun, 27 Jun 2004 07:36:22 -0600
 >
 > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >
 > I'm about ready to cut my 1/8 inch tungsten rod was wondering if there is a
 > preferred method to cutting it (such as scribe and snap like a piece of
 > glass). What does it take to cut or scribe?
 >
 > Gerry R
 >
 >