Re: Magnetic quenching.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Virtualgod" <mike.marcum-at-zoomtown-dot-com> 

Would that steal power that the secondary would otherwise receive and cancel
any benefits?

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, March 12, 2004 8:14 PM
Subject: Re: Magnetic quenching.


 > Original poster: "Binny" <binny-at-midmaine-dot-com>
 >
 > My heartfelt thanks to everyone who have contributed to this thread
because
 > I have enjoyed it immensely.Just to throw out an idea I have been thinking
 > of powering electromagnets by strategically placed coils in the primary's
 > field so as to quench the gap  at 120 BPS. Any comments?
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Friday, March 12, 2004 6:46 PM
 > Subject: Re: Magnetic quenching.
 >
 >
 >  > Original poster: "June Heidlebaugh" <rheidlebaugh-at-desertgate-dot-com>
 >  >
 >  > The Edison cell rectifiers I used were made near the turn of the
century
 >  > 1900 were efficient and did not waste much energy or produce excess
noise.
 >  > The were resonant ,tuning fork, rectifiers with 2 Cm square contacts
that
 >  > buzzed at 60 hz. I used them till 1980 when the contacts were to thin
and
 > I
 >  > replaced the contacts with a diode. The contacts and tuning fork were
 >  > mounted on a 1/2" slab of slate for insulation. Heavy but worked well.
 >  >       Robert   H
 >  > ----- Original Message -----
 >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 >  > To: <tesla-at-pupman-dot-com>
 >  > Sent: Thursday, March 11, 2004 11:06 PM
 >  > Subject: RE: Magnetic quenching.
 >  >
 >  >
 >  >  > Original poster: G <bog-at-cinci.rr-dot-com>
 >  >  >
 >  >  > Synchronous rectifiers would have been a possibility...
 >  >  >
 >  >  > Regrads,
 >  >  > Gregory
 >  >  >
 >  >  > >Original poster: "Lau, Gary" <gary.lau-at-hp-dot-com>
 >  >  > >I have not done a lot of reading of Tesla's material.  I have to
 > wonder
 >  >  > >how he managed to build a HV DC power supply?  Wasn't this before
HV
 >  >  > >vacuum tube rectifiers were available?
 >  >  > >
 >  >  > >I can't imagine that the "blast" created by convection currents
would
 > be
 >  >  > >very effective.
 >  >  > >
 >  >  > >Gary Lau
 >  >  > >MA, USA
 >  >  >
 >  >  > --
 >  >  > "Without ZIM, I am lost."
 >  >  > GeekID#-1229
 >  >  > http://thegeekgroup-dot-org
 >  >  >
 >  >  >
 >  >  >
 >  >
 >  >
 >  >
 >  >
 >
 >