[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SSTC hits 66"



Original poster: "Eastern Voltage Research Corporation" <dhmccauley-at-easternvoltageresearch-dot-com> 

I just finished my new PSSTC (Pulsed SSTC) and have hit 66" so far with
minimal tuning and pretty shoddy primary tank wires (12 AWG).

Specifications from these photos:
DC Bus Voltage:  335VDC
Primary Capacitor:  0.11uF, 12kV MMC
Fres:  111 kHz
Pulsewidth:  250us
PRF:  100 Hz


The whole webpage describing my coil can be seen here:
http://www.easternvoltageresearch-dot-com/sstccoil05.htm

Arc photo prior to my full-bridge blowing up.  (See secondary to primary arc
which initiated failure)
Distance from toroid to right wall is approximately 70 inches.
http://www.easternvoltageresearch-dot-com/images/isstc_arcs_bwtitle.jpg

Full size arc photo of BW above (color)
http://www.easternvoltageresearch-dot-com/images/isstc_arcs_fullsize01.jpg

55 inch POWER STRIKE to ceiling
http://www.easternvoltageresearch-dot-com/images/isstc_arcs05.jpg


Dan