[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: toroid



Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Why worry about the conductivity of the base material if it is going to be
covered by Al tape anyways.

Gerry R.


 > Original poster: Jimbo07031982-at-aol-dot-com
 >
 > Build it up with body putty (automotive) and add a generous amount of fine
 > Conductive graphite powder to make it conductive.  Then sand it smooth for
a
 > good toroid.  Use at least 20-30% graphite powder.
 >
 > Dr. Resonance
 > i think this is what i am going to do thank's all for your help this
seem's
 > to be the best way of doing it
 >
 >