[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Most Conductive and Readily Available?



Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 

At 08:09 AM 11/8/2004 -0700, you wrote:
>Original poster: "patrick herd" <zl2uph-at-hotmail-dot-com>
>
>Hi Tedd,
>
>How big an area do you need to cover?
>
>as you can ger conductive silver ink but it's a tad expensive... if you 
>need to cover a large area you could try the paint that's designed to have 
>fridge magnets stuck to it (it contails iron powder) the other option 
>would be the conductive paint designed for protecting buildings against EMPs.
>
>Hope this helps

There are a wide variety of paints used for "gilding" that are conductive. 
Typically they are loaded with aluminum or copper powder.  The conductivity 
varies somewhat.

Some flat black paint uses carbon black as the pigment and is 
conductive/resistive.

What sort of conductivity (ohms/square) do you need?


>Pat
>
> >From: "Tesla list" <tesla-at-pupman-dot-com>
> >To: tesla-at-pupman-dot-com
> >Subject: Most Conductive and Readily Available?
> >Date: Sat, 06 Nov 2004 08:44:46 -0700
> >
> >Original poster: "Tedd Payne" <teddp2-at-comcast-dot-net>
> >
> >What's the most conductive and readily available paint?
> >
> >Thanks for any suggestions!
> >
> >Tedd
> >
> >