[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: estimated output from coil?

To: tesla-at-pupman-dot-com
Subject: Re: estimated output from coil?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 29 Sep 2004 20:00:48 -0600
Resent-Date: Wed, 29 Sep 2004 20:01:42 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <7E8JSC.A.yTF.4j2WBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


We measured it once with small spheres.  Output is 19.5 kV.

Dr. Resonance
 >
 > My small Science First coil has an approx 1 inch spark length discharge to
 > ground.  The frequency of the secondary is around 1 Mhz.  What is the
 > estimated output and how would I determine it?
 >
 > Thanks,
 > Jack
 >
 >
 >

Prev by Date: Re: x-ray with small Tesla coil as driver
Next by Date: Re: DRSSTC thoughts...
Prev by thread: estimated output from coil?
Next by thread: Measuring Streamer characteristics
Index(es):
- Date
- Thread