[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cap orientation

Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>

Are you shure? because we used an o-scope and a funtion generator set to the 100 range. I guess well have to double check. 833Hz may indeed simply be one of the nodes.
Thanks.

           Steven Steele
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, April 06, 2005 7:53 PM
Subject: Re: Cap orientation


Original poster: Steve Ward <steve.ward@xxxxxxxxx>

I made a typo

On Apr 6, 2005 12:43 AM, Steve Ward <steve.ward@xxxxxxxxx> wrote:
> Hi,
>
> Please check your decimal places over again.  Your frequency is off by
> about 10^3 and your capacitance by 10^10.

Should be 10^2, not 10^10.
>

Steve Ward