[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How good are MMC caps ;-))
- To: tesla@xxxxxxxxxx
- Subject: Re: How good are MMC caps ;-))
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 20 Aug 2005 00:22:19 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Sat, 20 Aug 2005 00:23:36 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <qRa8i.A.W5F.nxsBDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Illicium Verum <sebas@xxxxxxxxxxxxxxxx>
Hello,
I have a couple of questions.
1. Are bleeding resistors required for balancing if all
capacitors are the same?
2. Do bleeding resistors not take away some energy?
3. What are the advantages or disadvantages of using one big
MMR (Multi Mini Resistor) connected in parallel with the MMC AFTER
using the tesla coil with the purpose of discharging? (I was thinking
on a solenoid based circuit that connects the MMR over the MMC after
power shutdown)
Best regards,
Sebastiaan