[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Perfecting my final design...

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>


Hi Adam,

Having no experience with dual layer primaries, I'm wondering if my interpretation of "opposite" directions is correct. Seems like one layer would undue the other layers inductance. I must be missing something.

Gerry R.


> Original poster: "Adam R." <arabraxas@xxxxxxxxxxx>
>
> before and have been wanting to give it a go: a simple dual layer
primary.
> It will be 1/4" OD Cu tubing ten turns, each wound in opposite
directions