Re: Fwd: O-scope & tuning

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Finn Hammer <f-h@xxxx>

Tim,

Yes, I still remember how difficult it was to measure the resonant 
frequencies the first time, and I often got confused doing it.

However, I always found what I need in Malcolm Watts article, which 
is ready for download at the bottom of this page:

http://hot-streamer.com/ross/resources/measure/measure.htm

Hope this helps.

Cheers, Finn Hammer

Tesla list wrote:

> Original poster: Timjroche@xxxxxxx
> hey all,
>
> got my first o-scope but no manual, so excuse my ignorance, i also 
> have a small DIY wave generator. so...i got my secondary : 20" L, 3" 
> Dia, 24 gauge, 995 turns
> How do you physically hook it all up? I know to tune the 2ndry first 
> then prim. but do you hook the probe to rf grnd and other to 
> topload? Same as wave gen??
> remember the 1st time you did this? i feel more lost now then the 
> day i started gathering parts, many months ago! any guidance would 
> be greatly appreciated
>
> tjr
> Return-path: <Timjroche@xxxxxxx>
> From: Timjroche@xxxxxxx
> Full-name: Timjroche
> Message-ID: <199.48eb47f8.307d922f@xxxxxxx>
> Date: Tue, 11 Oct 2005 18:09:51 EDT
> Subject: O-scope & tuning
> To: tesla@xxxxxxxxxx
> MIME-Version: 1.0
> Content-Type: multipart/alternative; 
> boundary="-----------------------------1129068591"
> X-Mailer: 9.0 for Windows sub 5119
>
> hey all,
>
> got my first o-scope but no manual, so excuse my ignorance, i also 
> have a small DIY wave generator. so...i got my secondary : 20" L, 3" 
> Dia, 24 gauge, 995 turns
> how do you physically hook it all up? i know to tune the 2ndry first 
> then prim. but do you hook the probe to rf grnd and other to 
> topload? same as wave gen??
> remember the 1st time you did this? i feel more lost now then the 
> day i started gathering parts, many months ago! any guidance would 
> be greatly appreciated
>
> tjr