[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: NST protection filter



Original poster: "Dirk Stubbs" <dirk@xxxxxxxxxxxxxx>

>From the man himself. :) Thanks, Terry!

After going to Digikey, the total parts cost $45 not including anything to
mount them on. What type of board do you recommend? Digikey offers numerous
types.

Man this TC is nickel and dime'ing me to death. :)  But I want to make sure
it is a safe as can be.


Dirk

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Thursday, September 08, 2005 3:05 PM
To: tesla@xxxxxxxxxx
Subject: Re: NST protection filter

Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>

Hi Dirk,

See:

http://hot-streamer.com/TeslaCoils/Misc/NSTFilt.jpg

http://hot-streamer.com/TeslaCoils/MyCoils/BigCoil/protection.jpg

http://hot-streamer.com/TeslaCoils/MyCoils/SmallCoil/small_protection.jpg

Cheers,

         Terry

At 09:47 AM 9/8/2005, you wrote:
>I have been reading a lot about protection for NST's. Does anyone
>have I diagram or specs on one? Dr. Resonance mentioned using a
>Terry filter. I searched for it on the net but found few design
>specs or how to build one.
>
>Thanks
>
>Dirk
>
>-


-- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: 9/7/2005


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.19/93 - Release Date: 9/8/2005