[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: False sense of security, thread locker

To: tesla@xxxxxxxxxx
Subject: Re: False sense of security, thread locker
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sun, 09 Apr 2006 15:45:20 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Sun, 9 Apr 2006 15:32:49 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <1OpILT9_W5O.A.j3H.B2XOEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Jon Danniken" <danniken@xxxxxxxxxxx>

> Original poster: "D.C. Cox":
>
> For rotary sparkgaps press the 1/2 dia. x 1.5 inch long brass rod
> axially thru the G-10 by having a machine shop do it.  They use a
> precision reamer than reams .0005" undersize and then the press fit
> using an arbor press is very tight.

How about putting the electrodes in the freezer (or on dry ice) to contract
them up enough so that they fit into the holes while they are cold?

Jon

Prev by Date: Re: heck! he did it again % )))
Next by Date: visibility of an arc
Previous by thread: Re: False sense of security, thread locker
Next by thread: Re: False sense of security, thread locker
Index(es):
- Date
- Thread