[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Did I just make a blunder?

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>


If your overturn the "primary" though, it really does all change 180 degrees ;-)) If someone has a coil were that change is simple and perfectly symmetrical, we could see directly if it makes a darn difference at all... If that report is "yes", then we can all go "nuts" :o)))



At 05:23 AM 2/5/2006, you wrote:
Turning it upside down wouldnt matter as far as wind direction it would still be wound in the same direction as before... for example.... a piece of all-thread rod is still threaded the same way if you turn it one way or the other the nut still goes onto it the same direction on either end.

Scot D

Tesla list wrote:

Original poster: "C. Sibley" <a37chevy@xxxxxxxxx>


Glad to hear that!  This morning I convinced myself
that I could wind it any old way and just turn it
upside down if it wasn't in the right direction.  I
realized my folly after the coil was completely wound.

Thanks for the help.