[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: spark gap/ primary coil

Original poster: FutureT@xxxxxxx

For a small coil you can use the coax for a primary.  There will
be some losses but not too bad.  I used to use it at one time.
You can remove some jacket at some spots here and there
in areas where you think you need to tap.  THen you can
attach an alligator clip or other clip around the wire at the
bare spot.  You may lose 5% spark length (maybe) using coax
depending on the coil's exact design, etc.