[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Terry filter

To: tesla@xxxxxxxxxx
Subject: Re: Terry filter
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sat, 07 Jan 2006 17:29:55 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
In-reply-to: <000a01c613e0$43d03b40$0401a8c0@customerb55909>
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
References: <000a01c613e0$43d03b40$0401a8c0@customerb55909>
Resent-date: Sat, 7 Jan 2006 17:23:50 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <QTK4HJNKrV.A.LVF.WuFwDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>

Hi,

The schematic is here:

http://hot-streamer.com/TeslaCoils/Misc/NSTFilt.jpg

Cheers,

        Terry


At 04:15 PM 1/7/2006, you wrote:

Schematic needed for a Terry filter I run <mailto:15Kv@60Ma>15Kv @ 60Ma  Nst
Just want to make sure to wire it up properly.
Gates

Prev by Date: Terry filter
Next by Date: Newbie cap and topload questions
Previous by thread: Terry filter
Next by thread: Newbie cap and topload questions
Index(es):
- Date
- Thread