[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: MMC bleed resistors

To: tesla@xxxxxxxxxx
Subject: RE: MMC bleed resistors
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 18 Jan 2006 04:53:01 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 18 Jan 2006 04:47:26 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <vW6a0uiV2CM.A.P7C.OrizDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>

10 Meg, 1/2 Watt, Carbon film, on each cap.

Regards, Gary Lau
MA, USA

> Original poster: "Gates" <ryker@xxxxxxx>
>
> What value of bleed resistors can I use for my mmc setup?
> I have 2000V CDE caps of .15mF
> Thanks Gang
> Gates

>

Prev by Date: SI units.. Re: Capacitance HELP
Next by Date: Re: Splicing Magnet Wire
Previous by thread: RE: MMC bleed resistors
Next by thread: Re: MMC bleed resistors
Index(es):
- Date
- Thread