RE: PIRANHA - New Top Load Configuration

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Brian" <brianv@xxxxxxxx>

Terry,
Thanks for the info, I am familiar with the it, I used that program for
awhile when I was designing for industrial coils (Actown Electrocoil") it is
a pretty good program then we switched to a company called "Integrated
Engineering" out of Canada and their program worked pretty good too, but I
do not think they have a free version.

Thanks
Brian

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Friday, November 03, 2006 11:37 PM
To: tesla@xxxxxxxxxx
Subject: RE: PIRANHA - New Top Load Configuration

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

At 10:20 PM 11/3/2006, you wrote:
>Terry,
>Just out of curiosity what program are you using for that simulation?
>
>Brian
>.........
>http://drsstc.com/~piranha/PIRANHA/PIRANHA-2/newcoil-01.jpg
.........

It's Ansoft's Maxwell SV.  A "free" program :-)))))))))

Their site is down tonight, but you can find it there:

http://www.ansoft.com/

It is an old 80's style interface and logic thing (think of it as
"well tested" :o))) but it works real good.

Cheers,

         Terry