[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Spiral maker?



Original poster: "Brian" <brianv@xxxxxxxx>

Glad to see you made the trip OK D.C. I have the 3D drawings almost complete
for the Dual MOT TC; also the simulation is looking good!

Brian

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Tuesday, November 21, 2006 7:58 PM
To: tesla@xxxxxxxxxx
Subject: Re: Spiral maker?

Original poster: "resonance" <resonance@xxxxxxxxxxxx>




Yes,   Resonance Research Corp at www.resonanceresearch.com

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, November 21, 2006 12:23 PM
Subject: Spiral maker?


>Original poster: StephenTetorka@xxxxxx
>Hi All:
>Might anyone know who can make/supply wireform spirals?
>Dimension of approx 3 foot diameter having approx 6 turns...wire to
>be aluminum or copper rod 1/8 inch diameter.
>Kind regards,
>Steve
>