[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: pvc pipe thickness.

To: tesla@xxxxxxxxxx
Subject: Re: pvc pipe thickness.
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 04 Oct 2006 20:10:45 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
In-reply-to: <736d66420610041905j6eff0be7s53877bcc8af9d27e@xxxxxxxxxxxxx m>
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
References: <736d66420610041905j6eff0be7s53877bcc8af9d27e@xxxxxxxxxxxxxx>
Resent-date: Wed, 4 Oct 2006 20:10:19 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <Kb1Uh_DofNJ.A.irC.LmGJFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

Hi,

It's fine!! All "plastics" are fine... If it is a greasy black orsomething (loaded with conductive carbon black to resist UV) then itmight be bad! But in general, all plastics are so highlynon-conductive that they are all good.


Cheers,

        Terry


At 08:05 PM 10/4/2006, you wrote:

I need a 4" diameter pvc pipe for my current coil spec.

I got a cut off which has a thickness of about 1/4 an inch. Is this too thick?

Prev by Date: pvc pipe thickness.
Next by Date: RE: pvc pipe thickness.
Previous by thread: pvc pipe thickness.
Next by thread: RE: pvc pipe thickness.
Index(es):
- Date
- Thread