[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PIRANHA - New Top Load Configuration



Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Yep, thought about that looking at Terry's cool pics. But, I think it should be tried as is. Top voltage shielding may be fine given the size and position to the secondary of the SS balls. Of course, if the balls are moved too far out, then a shielding concept would be a likely addition.

Take care,
Bart

Tesla list wrote:

Original poster: "resonance" <resonance@xxxxxxxxxxxx>



You might also consider running a flat 1/8th inch aluminum plate across the top between the sphere. From a geometric standpoint, this would help stabilize the electric field and add some capacitance to the topload.

Interesting concept.

Dr. Resonance



That's a very cool look!  The matching quad dragon ground points will be
a nice accessory.


They are threaded and also act like bolts to hold down the top cover. They act more like a strike rail that dedicated ground points. But the top balls could probably be easily adjusted for any case. BTW - Never tell an artist your going to stick their work into a milling machine and "work on it" =:O