[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

FW: 10kva pole pig needed with 29kv primary



Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

With single horn tranies, would one simply connect the cases together and rf
or mains ground them? Just curious...
Jim Mora

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Tuesday, October 17, 2006 10:40 PM
To: tesla@xxxxxxxxxx
Subject: RE: 10kva pole pig needed with 29kv primary

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Dr R,

Could you take two dual horn 14400 phased correctly and connect two of the
horns to the cases to get 28800 like a neon and have 20kva? I have seen
posts of people grounding one of the horns...

Jim Mora

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Tuesday, October 17, 2006 8:30 PM
To: tesla@xxxxxxxxxx
Subject: Re: 10kva pole pig needed with 29kv primary

Original poster: "resonance" <resonance@xxxxxxxxxxxx>



I have 14.4 kV 10 kVa pole xmfrs for sale.  Contact me off-list if
interested.  I get a 60% discount with Watkins-LTL freight carriers.

Dr. Resonance



 >anyone near pennsylvania with a 10kva pole pig for sale,
 >preference for 29kv primary, however, will take smaller. should
 >have dual high voltage leads besides one.