[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ARSG Motors (fwd)



---------- Forwarded message ----------
Date: Sat, 25 Aug 2007 20:34:32 +0000
From: david baehr <dfb25@xxxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: ARSG Motors (fwd)


my first rotary gap that i made years ago , used a 12v  heater  blower
motor from an old Ford truck, spinning an 8"  lexan disk with eight
spinning electrodes , worked well,...you can push thoes motors to 24V or
so,...it got pretty hot, but kept on goin'..............

________________________________________________________________________________

      From:  "Tesla list" <tesla@xxxxxxxxxx>
      To:  tesla@xxxxxxxxxx
      Subject:  Re: ARSG Motors (fwd)
      Date:  Sat, 25 Aug 2007 13:34:59 -0600 (MDT)
      >
      >---------- Forwarded message ----------
      >Date: Fri, 24 Aug 2007 16:24:31 -0700
      >From: Jim Lux <jimlux@xxxxxxxxxxxxx>
      >To: Tesla list <tesla@xxxxxxxxxx>
      >Subject: Re: ARSG Motors (fwd)
      >
      >At 05:42 AM 8/24/2007, you wrote:
      >
      > >---------- Forwarded message ----------
      > >Date: Fri, 24 Aug 2007 15:11:19 +0930
      > >From: The Engine Centre <jetmac@xxxxxxxxxxxxxx>
      > >To: Tesla list <tesla@xxxxxxxxxx>
      > >Subject: Re: ARSG Motors (fwd)
      > >
      > >A washing machine, spin motor or a main motor, most are
      universal brush
      > >motors,they are easy to get and cheap, i have one which
      runs 13000 no load,
      > >which is far too fast BUT  with a small variac you can
      control the speed to
      > >what ever you want.
      >
      >
      >In the U.S., most washing machines (older ones anyway) use a
      pretty
      >standard capacitor start induction motor in the 1/2HP range.
      >
      >My new "fabric care system" (they're not just a washer any
      more) uses
      >a three phase inverter to drive its motor at a whole variety
      of speeds.
      >
      >
      >Other universal series wound motors would be from vacuum
      cleaners or
      >from an electric drill (sans gearbox) or, as you found, from
      a
      >electric grinder.
      >
      >
      >
      >
      >


________________________________________________________________________________

Learn.Laugh.Share. Reallivemoms is right place!