Re: [TCML] capacitors

[Tom Trevethan <t.trevethan@xxxxxxxxx>]

Hi,

That's a big MMC - 200J per bang - IIRC about the same size as the one 
used for
Electrum. What power are you planning to run at?

There is a useful list of good polypropylene capacitors for tesla coil 
use here:
http://hot-streamer.com/TeslaCoils/MMCInfo/good-bad.txt

The Cornel Dubilier 942C20P15K (150nF, 2000V) seems to be very popular, and I
have seen them advertised for $3-4 each. You would need 20 x 34 = 680 (approx
$2000).

Tom.

Quoting Tomas Stankevic <Tomas.Stankevic@xxxxxxxx>:

> Hi,
> what capacitors would you recommend me to build a 250nF @ 40kV MMC? (for=20
> DC TC powered by 3phase pig) how much (approximately) it will cost? What=20
> about shipping to Lithuania?
>
> Toma=9A
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla