[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] measure VDG voltage




-----Original Message-----
>From: Vladimiro Mazzilli <V.Mazzilli@xxxxxxx>
>Sent: Dec 20, 2007 5:31 AM
>To: "tesla@xxxxxxxxxxxxxx" <tesla@xxxxxxxxxx>
>Subject: [TCML] measure VDG voltage
>
>Can anyone suggest me suggest a method to measure the voltage present on a topload of a Van de Graaf generator?


some form of very high input impedance Efield probe at some distance, where it won't get zapped by a stray spark.

Put a known voltage on the VDG (with a wire up the column), e.g. 1000 V.  Measure the reading on your Efield probe.  Run the VDG, measure the reading.  Divide by the 1000V reading to get kV.

The challenge is that any sort of load on the VDG will reduce the voltage.


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla