[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Candle Power

To: tesla@xxxxxxxxxx
Subject: Re: Candle Power
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 14 Feb 2007 23:42:32 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <tcmlmod@xxxxxxxxxxxxx>
Resent-date: Wed, 14 Feb 2007 23:42:27 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <aTido51tWTB.A.cQD.TDA1FB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Mike <megavolts61@xxxxxxxxx>

No doubt this is a trick, but a rather good one. At the end hepushes the leads into view of the camera while the motor isrunning. being the other end of the leads are connetect to thenails, I don't see how the circuit is complete and how current canflow in it...even if powered from underneath somehow.

Don't be flakey.<http://us.rd.yahoo.com/evt=43909/*http://mobile.yahoo.com/mail>GetYahoo! Mail for Mobile and<http://us.rd.yahoo.com/evt=43909/*http://mobile.yahoo.com/mail>alwaysstay connected to friends.

Prev by Date: RE: Electricial conductive beam
Next by Date: RE: 18" sparks at 2KVA
Previous by thread: Re: Candle Power
Next by thread: Re: Dual MOT plans (was:Re: screw in tungsten-molydenum alloy electrodes for RSGs)
Index(es):
- Date
- Thread