Re: gold secondary

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Drake Schutt" <drake89@xxxxxxxxx>

Gold might have some advantage but it would be 
prohibitavley expensive as gold is around $8,000 
more or less a pound.  you would also have to 
find somewhere that sells it in lengths and 
gauges that you need- which would be somewhere 
around 24awg and around half a pound for a 
respectable sized secondary.  all in all this 
dose not sound like a good idea- (i dont even 
know if it would work) too expensive for little 
or probably no benefit.  however you can find 
gold and all sorts of colors and sizes of proper 
magnet wire at this website: 
<http://www.electromechanicsonline.com/default.asp?cat=Wire%2C+Magnet>http://www.electromechanicsonline.com/default.asp?cat=Wire%2C+Magnet

regards
drake schutt

On 2/15/07, Tesla list <<mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx> wrote:
Original poster: "earl rhodes" 
<<mailto:earl_1975@xxxxxxxxxxxxx>earl_1975@xxxxxxxxxxxxx>

hello earl here
this is a most serious question i have looked for
materials and it wouldnt really cost that much
!considering! and is something i may do !what
would be the result of winding a gold secondary
would there be any benefit ! has this been done !
if so could you please point me to the info
thanx
ps. dont laugh !too hard!

_________________________________________________________________
MSN Hotmail is evolving ­ check out the new
Windows Live Mail <http://ideas.live.com>http://ideas.live.com