[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Help required - ignition coil Tesla



Original poster: "James Howells" <james@xxxxxxxxxxxxxxxxxxxxxxx>


www.SpamJab.com {UgzndUInruKjv2Cy9r}

----- Original Message ----- From: "James Howells" <james@xxxxxxxxxxxxxxxxxxxxxxx>
To: "Tesla list" <tesla@xxxxxxxxxx>
Sent: Wednesday, January 31, 2007 10:27 AM
Subject: Re: Help required - ignition coil Tesla


Thanks very much DEREK for the response > I will try this ( when I sort out where I can get the diodes ) and I will get som of the insulated wire for the primary

Is it 2.5 sqmm   or 2.5 mm dia?
I LEFT THE LINK OFF THE OTHER E-MAIL - FINGER TROUBLE , SENT IT OUT BY ERROR

The set up so far is on    http://photos.yahoo.com/jmshwlls

www.SpamJab.com {UgzndUInruKjv2Cy9r}

>