Re: [TCML] Tuning idea

["Ben Sneath" <bsneath@xxxxxxxxxxxxxxxx>]

hello all,

would it not be possable to make a jig to cut out 50 1'
diameter semicurcular plates then assemble half onto an
alumimiun shaft spaced with washers, and fix the other half
to a sheet of al, then put every thing into oil on an
acrylic frame...

ben

> Harold, Gary, all
> 
> Regurgitation is the name of the game.  :-)
> Allow me to do so about the Ambassador coil. The primary
> tapping  arrangement was successful, and still functions
> to this day. Tapping on the fly is quite possible if you
> do it right. Still my favorite primary.
> 
>
http://home5.inet.tele.dk/f-hammer/tesla/ambassador/primary/primary.htm
> 
> Cheers, Finn Hammer
> 
> Harold Weiss skrev:
> > Hi All,
> 
> > 
> > I do remember seeing a picture of one primary in which
> > the tap point was  motorized and could be changed during
> > a run.  IDK, but I'd think the  system would have
> > problems with arcing and welding itself. 
> > David E Weiss
> 
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla