Re: [TCML] Single MOT SISG

[piranha <piranha@xxxxxxxxxx>]

See this:

http://drsstc.com/~piranha/p-2/p-2-index.html

http://hot-streamer.com/temp2/PIRANHA-II.zip

Terry



bartb wrote:
> Hi Scott,
>
> Exactly what Terry Fritz did when he conceived the SISG. Here's a 
> photo of his Piranha Coil MOT and 2 board setup. I think this was his 
> second SISG and he's using the pcb which Mark Dunn put together.
>
> http://www.classictesla.com/temp/PIRANHA-Const-006.JPG
>
> Take care,
> Bart
>
>
> Scott Bogard wrote:
> > Hey guys,
> >      Could one design a SISG coil to run off of a single MOT, if so 
> > how many boards would one need.  Thanks.
> >
> > Scott Bogard.
> >
> >   
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla